Hammer and ChiselTrying to remove PVC fittings from a pipe is difficult because they are very snug and are often also glued in place. One way to remove the fittings is to use a hammer and chisel. You place the chisel at the seam and tap it with a hammer. This will cause the fitting to dislodge and slip off the pipe.
People also ask
How do you separate PVC pipe fittings?
If you need to separate the joint, the only option is to cut it. You can use a hacksaw or a PVC cutter for this job, and once the fitting is gone, you can install a new one. To do this, you’ll need to close the gap left by the missing fitting by gluing a short length of pipe (a nipple) to one of the pipes you wish to join.
How to choose the right fittings for your PVC pipe?
Choose PVC fittings that are slightly smaller or larger than the PVC pipe you are connecting to it. This will create a fit that is very tight, which will prevent leaks from forming or the fittings from being blown off the pipe due to pressure.
Will this method damage one of the PVC fittings?
This method will certainly damage one of the pvc fittings. After cutting through the 90 degree elbow with cleanout opening and digging out the bonding pipe in the 90 degree elbow with cleanout opening, the 90 degree elbow with cleanout pipe is no different from the previous one.
How do you unglue PVC pipe joints?
Here’s what to do: Cut out the problem joint Use a hacksaw to cut the PVC pipe flush along the fitting of the joint that you wish you could unglue [source: This Old House] . Get a new fitting and coupling Find a new fitting that satisfies your new needs. Prime the PVC Apply a thin layer of purple primer to the ends of your PVC fittings.