How to Remove the Quick Connector type (b):Turn off hot and cold water supply valves underneath the sink. Place a bucket underneath the faucet connections. Turn on the faucet to release water pressure in the faucet. Push the quick connector up to compress it and keep holding it or the hose while doing this.
People also ask
How do I remove the quick connect from the hose?
Put your fingers on the very top of the white quick connect adapter while maintaining the hose upward. Pull the quick connect down and release the hose at the same time. Apply steps 4 to 6 to separate the black side of the quick connect from the long sprayer hose. d.
How to install the quick connect adapter on a kitchen faucet?
Put your fingers on the very top of the white quick connect adapter while maintaining the hose upward. Pull the quick connect down and release the hose at the same time. Unscrew the quick connector type (b) from the hose counter-clockwise. How to Install the Quick Connect adapter type (c): Place a bucket underneath the faucet connections.
How do you remove the quick connect hose on a Moen faucet?
Simultaneously pull the gray ring at the top of the brass tube down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it. Then, how do you remove the Quick Connect sprayer hose on a Moen faucet? Turn off the valves under the sink by rotating the valve handles counterclockwise.
What is a quick-connect fitting?
What is a quick-connect fitting? The term 鈥渜uick-connect鈥?simply refers to the ability to connect tubing to a fitting very quickly. Introduced to the water treatment industry in the late seventies, and early eighties, quick-connect fittings revolutionized the way we put water equipment together.