how to remove a propress fitting

0 Comments 17:27

how to remove a propress fitting插图

Best answer


To remove a brass fittings, you can use a plunger or a large spoon. How Do I Remove A Propress Fitting? Remove a ProPress fittings bycutting the fitting half way down. This will cause the pressure reliefs to come off easily and quickly.

People also ask


  • What do I need to know before installing a ProPress fitting?

  • Viega ProPress sealing elements, separator rings, and grip rings are to be visually inspected prior to installation to ensure the seal is intact and properly located within the fitting. 3 Handling Instructions 3.1 Transport

  • Can ProPress fittings be pressed on copper tubing?

  • ProPress 2 to 4 fittings are designed to be pressed with ProPress XL-C press rings and V2 actuator to produce a non-detachable, secure connection. 2.4.4 Copper Tubing Viega ProPress may only be pressed onto copper tube in accordance with ASTM B88 or B75.

  • What should I look for when installing Viega ProPress?

  • All Viega ProPress components and associated tubing shall be free from dirt, debris, or items that may interfere with the sealing element and the press connection. Viega ProPress sealing elements, separator rings, and grip rings are to be visually inspected prior to installation to ensure the seal is intact and properly located within the fitting.

  • How do you rotate a ProPress fitting?

  • 2.5.9 Rotating a Pressed Fitting Once a ProPress fitting has been pressed, it can be rotated (not by hand), but once rotated more than five degrees, the fitting should be repressed to restore resistance to rotational movement. If the fitting is re-pressed, care should be taken to align the flat sides on the jaw with those on the fitting.

    Leave a Reply

    Your email address will not be published.

    Related Post