[tp widget="default/tpw_default.php"]

how to fit car speakers

0 Comments 19:13

how to fit car speakers插图

How to choose the right car speakers for your car?

The mounting height should fit flush to the space allotted for your speaker. The cutout diameter is measured as the largest diameter at the back of the speaker. Commonly corresponding to the largest diameter at the bottom of the speaker flange, it is correspondent to the size necessary for the speaker to fit into your car’s speaker slot.

How do I replace the speakers in my car?

A speaker adapter will make this easy in most cases. These fit in place of the original speaker (often with the same screw hole dimensions) and provide a standard car speaker size hole to mount your replacement speakers. Some also include additional openings that can be scored with a utility razor and cut in case you’re using a different size.

What is the size of a car speaker hole?

3.5 inch car speakers have a hole mounting size of about 3 1/4″ wide. Always be sure to check the mounting depth before buying a replacement and be aware that some require some creative work to make the screw tabs fit.

How do you hook up speakers to a car theater system?

When a home theater system is hooked up to a separate set of 5.1 speakers, the amplifier and receiver connect to the car speakers through a 5.1 speaker cable that has six color-coded wires. The receiver then sends the appropriate signals to the car speakers for them to play. Will 6 9 speakers fit my car?

Why do speakers need inline resistors?

Look at the electronic characteristics of your speakers. Some have inline resistors to prevent static and crosstalk, some allow wiring in a series circuit configuration to allow you to add woofers and tweeters where you need them, and some can only be wired terminally to maintain the correct system impedance.

How to access factory speakers in car?

The work you’ll have to do to access your car’s factory speakers will vary from car to car. In worst case scenarios, for example, you may need to remove seats, crawl into the trunk to access important bolts or wires, or even remove entire door panels to gain access to the speakers.

How to connect a speaker to a car?

Connect the new speaker to the car’s electrical system. Usually, connecting your new speaker is a fairly simple matter of plugging your speaker’s wiring harness into the car’s wiring harness. However, if your car doesn’t have this simple type of connection, you may need to connect your speaker with a soldered or crimped connection.

How to prevent electrical damage to car?

Prevent electrical damage by disconnecting your car’s battery. As with nearly all types of electrical work, it’s important to protect yourself and the electrical system before beginning. Disconnecting the battery’s negative terminal prevents the risk of injury from electric shock or damage to the car’s electronics through short circuiting, so be sure to do so before tampering with any of the car’s internal electronics.

How to remove speaker grill?

Before the speaker can be modified or replaced, this barrier must be removed. Pry the grill off with a suitable tool, like a flat head screwdriver, removing any bolts or screws that are holding it in place if necessary.

How to test if speaker is working?

Now that you’ve connected your speaker, it’s important to test the connection so that you don’t have to waste time later to fix a problem. Re-connect the battery’s negative terminal and turn on the car’s radio or stereo. Listen for sound coming out of your new speaker or look for visible vibrations at high volumes . If your speaker won’t work, this means that there is a problem with its electrical connection.

Why do you cut off red on a speaker?

Red to red, black to brown, and there should be another red that you have to cut off because it’s used for testing when the speaker is manufactured.

What is a coaxial speaker?

Coaxial speakers are a 2-way full range speaker design using a woofer and a tweeter with basic crossover built into a single assembly.

What size speakers are good for midbass?

The good news is that 5.25 inch (5 1/4″) speakers are a bit better at midbass than their smaller counterparts like 4″ and 3″ speakers. They’re also one of the more popular and common sizes, meaning you’ll have a ton of options when shopping.

What is a 4 inch speaker?

4 inch speakers are similar to their smaller 3.5 inch siblings but offer a bit better sound. You can find 4 inch car speakers sold in several styles:

What is a component speaker?

Component speaker sets are made up of separately mounted woofers, tweeters, and crossovers that deliver better sound quality than coaxial speakers.

What is the difference between factory and aftermarket car speakers?

One big issue is factory vs aftermarket car speaker magnet sizes. Factory installed car speakers often have a shorter height and smaller magnet with a limited installation depth due to dashboard or body parts that block the bottom.

How many watts does a 5×7 speaker use?

5×7 inch speakers aren’t very common but you’ll come across them from time to time. Some average power handling ratings are about 30 watts to 50 watts. Unlike 4×6 speakers, its plate speakers aren’t much of an option as while they do exist they’re fairly rare.

How much power does a 4 inch speaker need?

Expect similar power ratings to 4″ speakers (about 25W-35W or so typically).

What size speakers should I use for a car door?

I recommend using 6×9 inch car speakers, 6.5-inch car speakers, 5.25-inch car door speakers, 4-inch car speakers, and 3.5-inch door speakers. You can select any car door speaker size according to the size of the door, check space available and select …

What is the difference between small speakers and big speakers?

Small speakers utilize less power while big speakers consume more power. These all speakers are the good ones and are also available in affordable ranges so you can select the perfect size of the speaker for your car doors very easily with the help of this Car Door Speakers Size chart.

What tool do I use to remove screws from a grill?

I used an electric drill and screwdriver for my aid. Electric screwdriver helped me to remove screws that are fitted in the grill, in no time and with little effort. These screws are the main reason for the stability of the grill and door panel.

Why should front door speakers be large?

Front door speakers should be large for having the best and enhanced sound listening experience. It is suggested to choose both front and rear door speakers of the same manufacturing company to prevent sound distortion in different pairs and they should be of high quality for excellence and perfection.

Can you change the size of a car door speaker?

I recommend replacing door speakers with the same size as of the factory fitted door speakers, however, you can always modify for a better size car door speaker.

Can you take the door panel off to replace speakers?

Now when replacing car door speakers, you will need to take the whole door panel off, for this, you have to remove screws that fix the panel. I saw a couple of screws across in the bottom. You never want to just pull the grill off, however, you can do this by carefully accessing the grill and following this guide.?

How to connect speaker wires to cassette unit?

Disconnect the battery to avoid any short circuits. Find the speaker wires where they emerge from the radio/ cassette unit. Identify the input terminals on the fader switch and then join the wires from the left- and right-hand channels of the cassette unit to their respective terminals on the fader switch.

How many wires are in a radio cassette?

The four speaker wires from the radio/cassette unit, which are used for the normal two-speaker arrangement, are first connected to the fader switch input terminals. From the switch output terminals a pair of wires, one positive and one negative, are connected to each speaker.

How many watts per channel for a radio?

Make sure that the speakers you buy are capable of handling the power output of your radio-cassette or graphic equalizer – if you have a 30 watts per channel unit, the speakers must be capable of handling at least that amount and preferably a little more.

What are the drawbacks of a car stereo system?

The standard twin-speaker car stereo system has one obvious drawback. If you mount the speakers on the rear shelf, to hear the sound clearly you often have to turn up the volume to a level that is too loud for the rear seat passengers.

Where are the speakers located on a car?

The usual position for the front speakers is in the front door panels and you may find a built-in mounting for the speakers behind the panels. You can sometimes also fit them to the kick panels situated in the footwells although they are at more risk of getting wet or knocked in this position.

Where do you put speakers in a saloon?

In saloon cars the rear speakers are best fitted to the rear parcel shelf. With hatchbacks and estates you could fit them to the rear side panels or small side shelves often found in the rear compartment, but make sure they can’t get knocked by any luggage. Again, the panels may have built-in mountings. 3. Fit speakers.

Where to mount speakers in a car?

In the rear of the car you can again mount the speakers in the doors (or the side panels on a two-door car), or on or under the parcel shelf.

There Are Two Types of Car Speakers

You can separate the tweeters, crossovers, and subwoofers into component speakers. The drivers include tweeters, subwoofers, and mid-range speakers. All parts are interconnected to create incredible sound quality.

What Size Speakers Are in My Car?

Good question. It is essential to determine the dimensions of your car before you decide to replace your car audio kit.

Other Considerations to Make Before Buying Car Speakers

Be sure to inspect the woofer quality before you go looking at the Car audio kits. To deliver high-quality bass, a good woofer should have both stiff and lightweight materials. To produce a better bass response, manufacturers often pair polypropylene and other materials.

What Speakers Fit My Cars FAQs

It would help if you had the right tools to do the job. Here’s a list of the tools you will need to do the job well.


No matter what speakers you choose, the most important thing is that you know what you’re buying and why. If you’re looking for a cheap option to fill up space, then buy any old set of speaker systems. If you’re looking for an upgrade or replacement for an existing system, then invest in something of good quality.

How to measure speaker size?

Rather, the measurement is based on the diagonal length of the speaker frame. On 4-hole speaker frames, the measurement is done starting at one hole and ending at the hole located at the opposite diagonal end. Other speakers with more or less than 4 holes measure their speakers based on the diameter of the frame.

What is the biggest problem facing buyers?

As mentioned earlier, the biggest problem facing buyers is the fact that no standardized means for measuring speakers exist. As such, learning how to measure car speakers is considered as something of a vital skill. Learning these measurements is perhaps your best bet to avoid purchasing …

Why is it important to pick up speakers?

Also, not all cars have the same speaker setup. Therefore, a set of speakers that fits in Car A may not fit with Car B, and vice versa. As such, it is vital that you pick up correctly sized speakers to make your life infinitely easier.

What is cutout diameter?

The cutout diameter is measured as the largest diameter at the back of the speaker. Commonly corresponding to the largest diameter at the bottom of the speaker flange, it is correspondent to the size necessary for the speaker to fit into your car’s speaker slot.

What degree does Simon have?

Simon graduated with a Mechanical and Electrical Engineering Degree. He has over 20 years of servicing experience in both Japanese and German car dealerships. He now acts as a freelance mechanic’s instructor for local schools.

Can you modify a stock speaker?

In these situations, the only available option is to modify the speaker housing. Some modifications can be as simple as converting the speaker’s mounting frame to match that of the car’s. Other modifications will constitute altering the housing itself, changing parameters such as housing depth and diameter.

Do speakers measure themselves?

Furthermore, the given measurements of a speaker don’t really correspond to the speaker size itself. This is what most speaker buyers don’t recognize, and it gives them major headaches come installation time.

Speaker Size

There are many different car speaker sizes on the market, each of which is uniquely designed to fit certain vehicles.


The 1 by a 2-inch range of automobile speakers is used for this kind of speaker. The sound support provided by tweeters is incredible. They assist with the improvement of the sound quality in your automobile radio system.

What Features Should You Look For

It might be difficult to gauge the size of a car speaker, but you already have your answer. Sometimes, rather than considering the speaker as single size, it may be more important to consider the speaker as a class.

Related Post