how to fit blind brackets

0 Comments 11:05

how to fit blind brackets插图

Best answer


Step 1: Raise the blindup all the way. Step 2: Find the swing-arm on the headrail. Step 3: Push it in an anti-clockwise direction. Step 4: Snap the headrail into the bracket. Step 5: Push the swing-arm in a clockwise direction to lock the headrail to the bracket. Now your blindis all set to start working.

People also ask


  • How do you attach blind brackets to a window?

  • Brackets can be fixed on either the face of the window surround or at the top. The brackets that come with your blind are drilled to allow you to fix them either way (fig.4a and 4b). You can screw your brackets to either the window frame, the adjacent walls or the underside of the top of the window.

  • How to Fit blinds to the wall?

  • How to fit blinds 1 Decide whether a face fix or a top fix is most appropriate: Face fix, which is when you fit the brackets to the window frame, with a face fix, … 2 Screw your bracket into the wall. 3 Install the blinds onto them. 4 Attach your safety device.

  • How do you measure for blind brackets?

  • Start by measuring the depth of where you鈥檒l install your brackets. To do this, measure how far your handle 鈥?and any other obstructions 鈥?protrude from the window. Use this measurement as the minimum distance for mounting. For outside mounts, measure the center point of the blind width to ensure even overlap on both sides. 2.

  • Can you screw a blind to a window frame?

  • The brackets that come with your blind are drilled to allow you to fix them either way (fig.4a and 4b). You can screw your brackets to either the window frame, the adjacent walls or the underside of the top of the window. It鈥檚 not a good idea to screw brackets into PVC window frames.

    Related Post