Follow these basic steps for working with a drive that’s already installed in a carrier designed for your laptop:Turn off the laptop.Unplug the AC adapter.Prepare your work area. …Remove the battery.Ground yourself before touching the old drive,and again before opening the bag or box that holds the new drive. …Locate the hard disk drive compartment or bay. …Unscrew any locking screws that may be holding the drive in place,or unlatch any catches. …More items
How do I choose the right SSD for my laptop?
Find the right SSD form factor and interface. The other thing you’ll want to check before you go out and buy a replacement SSD is your drive’s form factor; you need to make sure the drive will fit in the laptop. Most laptops have 2.5-inch drives, but ultraportable notebooks may use the 1.8-inch disk size.
How to choose and install a new hard drive?
Here’s how to choose and install your new drive. Choosing a drive that fits your budgets and does what you need is the first step. These days, your most important choice is between a traditional hard drive or a solid state drive (SSD). But there are few other things to think about, too. Should You Get Regular Drive, an SSD, or Both?
How do I get to the hard drive on my laptop?
1. Turn the computer off and remove the back panel. Turn your laptop off and then disconnect both the power cable and any other connected cables — including the SSD. Then unscrew the back panel and remove it to get access to your hard drive.
How to find the size of your laptop hard drive?
To find out the size of your laptop hard drive and manage its space flexibly, you can follow the steps below to access Disk Management. Step 1. Access Disk Management via the following two different ways. Right-click Windows start menu and choose Disk Management from the list. Press Windows + R key and then input msc and hit Enter.
What cable does a 2.5" drive use?
All modern 3.5″ and 2.5″ drives use a SATA connection for power and data. Advertisement. If you’re installing the drive into a desktop PC, the SATA power cable is a 15-pin cable that runs from your PC’s power supply. If your PC only offers the older 4-pin Molex cables, you can buy adapters that work just fine.
Where is the SATa cable on my computer?
You should be able to see your computer’s storage drive or drives mounted towards the front of the case. A SATA data cable should be running from the motherboard to the drive. A SATA power cable should be running from the power supply to the drive.
How to remove a sliding caddy?
Now, just use your screwdriver to remove the screws from the drive , whether it’s in a caddy or affixed directly to the case. The screws come in many sizes and lengths—some including silicone spacers for sound damping—and might be mounted to the bottom of the drive or the side, depending on your case’s design. It doesn’t really matter: just remove them, set them aside in a spot where you won’t lose them.
How to take off the back of a computer case?
Most designs require you to remove two to three screws from the back side before it will slide or swing out. Set the access panel aside. Some desktops require that you take the whole case cover off rather than just an access panel. If you’re unsure, look up your desktop model or case on the web. Instructions should be easy to find.
What does it mean to transfer your operating system?
Transferring your operating system (and all your data and installed apps) means not having to worry about reinstalling Windows, setting it up the way you like it again, and then reinstalling each of your apps. The downside is that it’s a pretty slow and tedious process.
Where should the SATa cable be running?
A SATA data cable should be running from the motherboard to the drive. A SATA power cable should be running from the power supply to the drive. Note : If you can’t see either a larger 3.5-inch drive or a smaller 2.5-inch drive, it might be mounted in an alternate spot.
What is the size of a hard drive?
Hard drives typically come in two sizes: 2.5″ and 3.5″ . The 3.5″ drives are also known as “full size” or “desktop drives.”. Pretty much every desktop PC out there has room for at least one (and sometimes many) 3.5″ drives.
How to install an M.2 SSD?
To install an M.2 SSD, simply insert the SSD into the M.2 slot at a 30-degree angle. Press down on the other end of the SSD and screw it to the motherboard. If you are connecting your primary hard drive, the SATA cable should be plugged into the first SATA channel. This may be labeled SATA0 or SATA1.
What size is a sata drive?
SATA drives come in two sizes. 3.5 inch (8.9 cm) SATA drives are used in most desktop computers. All-in-one PC monitors may require a 2.7 inch (6.9 cm) SATA drive.
How to connect a hard drive to a motherboard?
Attach the drive to the motherboard. Newer hard drives will use SATA cables, which are thin and resemble USB cables. Use a SATA cable to connect the hard drive to the motherboard. SATA cables can be connected in either direction.
How to remove old hard drive?
If you are removing an old hard drive, make sure any and all cables are disconnected from both the motherboard and the power supply. If the hard drive is screwed in, remove all the screws. You may need to remove more cables or cards in order to access the hard drives in a tight case.
What is the difference between a SSD and a hard drive?
Solid State Drive (SSD) vs. Hard Disk Drive (HDD): Hard Disk Drives are mechanical disk drives. They are usually slower, but less expensive. Solid State Drives have no moving parts. They are much faster, quieter, and more expensive. You can also purchase a hybrid HDD/SSD drive.
How to get my laptop to face up?
Turn over your laptop. Shut your laptop’s lid, then flip it over so that the bottom of the laptop is facing up.
How to turn off a laptop?
Turn off your laptop. Disconnect your laptop from its charger, then press and hold the Power button until the laptop turns off. You can also use the laptop’s Power settings to turn it off:
Why Do I Want To Do This?
The most obvious reason you want to upgrade your laptop hard drive is because the old one is dying (or has already died). That’s exactly where we found ourselves, with a dying hard drive throwing up errors left and right, and why we promptly upgraded the drive in our work laptop.
How to remove a hard drive from a laptop?
Loosen the mounting screws on the hard drive or hard drive caddy and gently remove the assembly from the laptop. Your primary concern here should be to 1) not drop any of the tiny screws into the body of the laptop and 2) not drag the hard drive or caddy across the circuit board beneath it.
Why do we need SSD in laptop?
While solid state drives improve any computer experience (we use them as primary/operating system disks in all our desktop machines too) they’re a match made in heaven for laptops: they’re silent, give off very little heat, consume very little power, and are very shock resistant all thanks to the lack of mechanical guts and moving parts. Further, they radically reduce your boot time and, in the process, give older laptops a much needed boost. Unless you have a very pressing need to use a mechanical drive in your laptop (e.g. you need a lot of local storage and only have one drive bay) there’s no reason not to upgrade to an SSD.
Why upgrade my laptop hard drive?
Upgrading your laptop’s hard drive is a great way to get some extra life out of an old machine (or resurrect a dead one). Read on as we walk you through the prep work, the installation, and the followup.
Where is the primary hard drive bay?
With this particular model we gain access to multiple components via the service panel. At the far lower right we find the primary hard drive bay (which houses the dead drive we wish to replace). Beside the primary drive bay you can see the two memory DIMMs, then beside that an empty mSATA slot, below that (the white rectangle with the wires) the Wi-Fi adapter, and above that section where the bare circuit board is visible there is a secondary drive bay.
Do you need a spacer for a drive caddy?
With the assembly removed all that’s left to do is swap out the old drive with the new drive. As we mentioned earlier in the guide, we didn’t need to use a spacer for our drive as the drive caddy functions as a spacer.
Can you boot a computer back into a cloned drive?
If you’ve clo ned your drive there isn’t really any wrap up to speak of: you should be able to boot right back into your computer as if nothing happened (albeit with a faster and/or bigger drive installed).
Why to Install a Second Internal Hard Drive?
Many of you might like to add a second hard drive to your computers for the following reasons:
How to make a computer recognize a second hard drive?
To make your computer recognize the second hard drive, you should initialize the hard drive through the following steps: Open Disk Management. Initialize Disk window will pop up and then choose MBR or GPT to initialize this drive. Format the drive.
How to initialize a new hard drive?
Step 2: For the newly installed hard drive, the system will automatically pop up the prompt to initialize it . The pop-up window looks like the following one.
How to remove hard drive from a sandbox?
Step 1: Disconnect the power to the chassis. Step 2: Remove the front cover of the chassis by unscrewing two fasteners shown in the following picture, and then nudging the cover to the side. Step 3: Remove the hard drive bracket from the chassis and fasten the hard drive into it.
What is a hard drive bracket?
Tip: The hard drive bracket is used to protect the hard drive from vibration and is generally suitable for 2.5-inch hard drives. In addition, some computers may be not equipped with it.
Why is the IDE interface being phased out?
Nowadays, IDE interface is gradually being phased out because of its slow data transfer rate. You can only see it in a very old computer.
How thick is a 2.5 inch hard drive?
However, if the hard drive interface is mSATA, M.2, or PCI (these interfaces are usually used in laptops), the size will be much smaller. Thickness: The last factor is thickness. The early 2.5 or 3.5-inch hard drives reached 9. 5mm, but the current hard drives are basically 7mm thick.
What is UEFI BIOS?
The UEFI BIOS will show all hard drives that are connected correctly and detected by the system. BIOS and UEFI interfaces can differ based on the motherboard make and model, so check your motherboard manual or manufacturer website for details.
How to connect a SATa cable to a motherboard?
Connect one end of the SATA cable to the drive, and the other end to an available SATA port on your motherboard, and you’re halfway there.
How to see if a drive is sata?
In the BIOS, go to the standard System Settings menu or the Integrated Peripherals > SATA menu to see all of the drives installed in the system. If all of your drive controllers are enabled and the drive is properly connected (and functional), it should be listed in the BIOS.
How many screws do you need to secure a drive to a cage?
Securing the drive to a cage usually requires four screws on the sides or bottom of the drive. Many cases—especially enthusiast cases—use tool-less trays that hold the drives with simple pins and clips.
What to do if your hard drive isn’t showing up?
If the drive isn’t listed, shut down your PC. Double-check all of the connections, boot into the BIOS and check again. If the drive still isn’t showing up and all the connections are secure, try plugging the SATA data cable into a different port on the motherboard.
What is the best way to mount a toolless tray?
Using screws is the more robust mounting method, but tool-less trays are fine for systems that won’t be moved around much.
Where do drive connectors point?
In mainstream cases, drive connectors will typically point to the rear. In enthusiast-class cases, it’s becoming more common to see the drive’s connectors facing the right side, making it easier to route and hide cables behind the motherboard tray. Some enthusiast-class also cases give users the ability to remove drive cages or to mount them in different positions to optimize air flow and simplify cable management.
How long does it take for a Samsung 850 EVO to open?
With a 250GB Samsung 850 EVO SSD installed, the laptop opened both Word and Excel in 1.8 seconds and Chrome in 1.1 seconds.
How to connect SSD to laptop?
Physically connect the SSD. Place the SSD in the enclosure or connect it to the USB-to-SATA adapter, and then connect it to your laptop with the USB cable. 2. Initialize the SSD. If the SSD doesn’t show up on your computer with a new drive letter, head to Windows’ Disk Management tool.
How much is a 250GB SSD?
A 250GB Samsung SSD is currently about $89 on Amazon and a 500GB version is about $120. For most people, the 250GB drive should be fine, but the 500GB one offers more flexibility, for only a little more investment. An external enclosure or adapter to connect that SSD to your laptop.
How to get to hard drive on laptop?
1. Turn the computer off and remove the back panel. Turn your laptop off and then disconnect both the power cable and any other connected cables – including the SSD. Then unscrew the back panel and remove it to get access to your hard drive.
How to tell if migration worked?
Another way you can tell the migration worked? You’re now booting up, launching programs, and multitasking so much faster than before.
How to make a backup of Windows 10?
Make a full backup of your system. Create a system image backup in Windows 10 by going to the Control Panel (hit the Win+X keyboard shortcut and select Control Panel), then go to "Save backup copies of your files with File History" (under System and Security). In the left menu, go to "System Image Backup" to create a system image on an external drive or network location.
Is my current drive bigger than my SSD?
Resize the current drive partition to be the same size or smaller than the SSD. While you’re in Disk Management, check to see if your current disk’s primary partition (usually, C:, the one that has Windows and your installed programs) is larger than the SSD.
How to make SSD faster?
Have some fun and see how much faster your laptop boots up and apps load! You can make your SSD even faster by downloading our Crucial Storage Executive software and enabling the Momentum Cache feature. Click here to download Storage Executive
How to protect your computer from static?
To protect your system’s components from static damage during the installation process, touch any of the unpainted metal surfaces on your computer’s frame or wear an ESD wrist strap before touching or handling internal components. Either method will safely discharge static electricity that’s naturally present in your body.
Is the Crucial logo a trademark?
Micron, the Micron logo, Crucial, and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. Mac is either a registered trademark or trademark Apple, Inc in the United States and/or other countries. All other trademarks and service marks are the property of their respective owners.
Can you touch the connectors on an SSD?
To protect your new SSD, do not touch the connectors on the drive.
What is the MiniTool partition wizard?
MiniTool Partition Wizard Free Edition can help you manage laptop hard drive flexibly. Its features like extend partition, move/resize partition, copy disk/partition, check file system, change cluster size, align partition and so on.
What partition table to use for target disk?
Use GUID Partition Table for the target disk: This optionmakes it possible to use all space of hard disk larger than 2TB, but UEFI boot should be enabled in BIOS.
What is the smallest SSD size?
Laptop SSD Sizes. SSDs don’t come in such large capacities as traditional hard drives. The smallest common SSD size is said to be 128GB, which is about 25 percent of the capacity of the 500GB hard drives you find on many inexpensive laptops. The most common SSD size is 256GB.
How big is a 5 inch drive?
5 inch drives are 100 mm long, 69.85 mm wide, and either 5, 7, 9.5, 12.5, 15, or 19 mm tall. Generally speaking, 3.5 inch drives are used in desktops and 2.5 inch drives are used in laptop computers. If you want to use a 2.5 inch drive in a desktop, you typically need a special bracket to fit it in a 3.5 inch drive bay.
How to get msc on Windows 10?
Press Windows + R key and then input msc and hit Enter.
What is the size of a hard drive?
As for hard drive physical size, hard drives come in two main sizes--"3.5 inch", and "2.5 inch"–which are technical classifications that refer to the width of a hard drive’s platter, but not the full dimensions of the hard drive unit itself.
Can you use GUID partition table on GPT disk?
For users whose operating system is already installed on a GPT disk, they will not see the option Use GUID Partition Table for the target disk.
How to shrink a 250 GB SSD?
Type the number of megabytes (MB) you want to shrink. Make sure the total size after the shrink is smaller than the SSD drive. If you have a 250 GB SSD, the total size after the shrink will need to be smaller than 250,000 MB (500,000 for a 500 GB SSD). Click Shrink.
What is EDS wrist strap?
EDS wrist straps prevent static discharges that can cause permanent damage to your hard drive and other computer parts. If you are not using EDS wrist straps, make sure to ground yourself by touching something metal before you begin working with the hard drives, or the inside of your laptop. …
How to ground SSD?
The external enclosure is a device that you place your SSD in. Make sure you are wearing your EDS straps before handling your SSD. If you don’t have EDS straps, make sure to ground yourself by touching something metal before handling the SSD.
How thick is a laptop SSD?
You also need to make sure the drive has the right interface for your laptop (SATA, or IDE). A 2.5-inch, 7 mm thick SATA drive is what is most commonly used in newer laptops.
How to find out what SSD is needed for my laptop?
Check your laptop’s user manual (or manufacturer’s website) to find out what type of SSD will fit in your laptop, as well as where the access panel is to install it. You may also want to check your warranty to make sure you won’t be voiding the warranty by performing unauthorized work on your system.
What is SSD drive?
An SSD (or "Solid State Drive") is a type of hard drive that uses flash memory instead of spinning discs. Because it has no moving parts it can read and write information faster and lasts longer than traditional hard drives.
What to do before cloning disk?
Close all applications. Before you launch your disk cloning software, close all windows and applications.
How much local storage do you really need?
The smallest common SSD size is just 128GB, which is about 25 percent of the capacity of the 500GB hard drives you find on many budget laptops. You can easily fit Windows 10 (20GB), Office 365 (3GB), Chrome (under 500MB installed) and even Photoshop (3.1GB) on such a drive, but the minute you start working with files or even running Windows updates, the drive will fill up quickly. It’s also important to note that, if your SSD is more than 75 percent full, performance may suffer.
What about eMMC storage (aka eMMC memory)?
Some of the cheapest laptops on the market (think under $300) come with a form of solid-state storage called eMMC (Embedded MultiMedia Card) memory, usually in 32 or 64GB capacities.
What is an M.2 SSD and do I need one? What about a 2.5-inch SSD?
These designations refer to the physical size, shape and connector on the drive, not to its performance. So, unless you plan to upgrade your laptop in the future, you shouldn’t care what design the SSD is.
Should I upgrade my storage later?
However, not every laptop is upgradable, so you could void your warranty, and, if you don’t know what you’re doing, damage your computer.
How much does an SSD cost?
However, there’s no doubt that laptops that come with SSDs are more expensive. The least expensive laptops we’ve seen with an SSD cost between $550 and $600, but many cost closer to $1,000, with relatively small 256GB drives. Meanwhile, you can get a perfectly functional laptop with a hard drive for under $400.
What is an M.2 SSD?
M.2 SSDs are thin memory sticks that look a lot like RAM DIMMs and pop into slots on the motherboard. A laptop with an M.2 SSD may use the SATA interface or the faster PCIe-NVMe interface.
Why is SSD more important than processor?
Getting an SSD is more important for overall performance than getting a faster processor, because even a slow SSD is three to four times faster than the speediest mechanical hard drive.